1SDA068535R1 ABB Tmax XT4 250 Ekip LS/I H 250A 4P MCCB

The ABB 1SDA068535R1 is a 4-pole moulded case circuit breaker rated at 250A with 70kA breaking capacity. It belongs to the Tmax XT4 frame. It is used for protection of LT distribution circuits in industrial and commercial installations.

Choose the ABB 1SDA068535R1 when your circuit needs 250A protection and the prospective fault current at the point of installation is within 70kA. It gives overload and short-circuit protection in one device. Accessories for remote tripping, status indication and operation differ by frame, so confirm the accessory list for this frame in the ABB catalogue.

The ABB 1SDA068535R1 is used as an incoming or outgoing breaker in main distribution boards (MDBs), sub-distribution boards (SDBs), motor control centers (MCCs), power control centers (PCCs) and feeder circuits, for loads up to 250A.

MCCBs of this type are commonly fitted with a shunt release for remote tripping, an undervoltage release, auxiliary and alarm contacts for status signalling, a motor operator for remote switching, rotary handles for door-mounted operation, extended or spreader terminals, and padlocking devices. Availability depends on the frame size, so check the ABB accessory list for the 1SDA068535R1 before ordering.

A thermal magnetic release uses a bimetal for overload and an electromagnet for short-circuit protection. It is simple and cost-effective for standard feeders. An electronic or microprocessor release measures current electronically and offers adjustable overload, short-circuit and, on some versions, earth fault settings. It is preferred where finer coordination between breakers is needed.

Calculate the prospective short-circuit current at the point of installation from the transformer kVA and percentage impedance (plus the upstream fault level), reduced by the cable impedance in between, then select an MCCB whose breaking capacity (Icu) at your system voltage (415V) is at least that value. Where supply must continue after a fault, check the service breaking capacity (Ics) too. Breaking capacity versions differ by brand and frame size, so always read the kA value for the exact model. In the ABB Tmax XT1 to XT4 frames the version letter shows the Icu at 415V AC: B = 18kA, C = 25kA, N = 36kA, S = 50kA, H = 70kA, L = 120kA, V = 150kA. Not every version is available in every frame.

Yes, the ABB 1SDA068535R1 (Tmax XT4 250 Ekip LS/I H 250A 4P MCCB) is listed on VendorStocks. Add it to your cart and choose “Continue to Buy”, or contact VendorStocks at +91 99021 83031 or support@skylightsenergy.in for a quotation, bulk quantities and delivery to your site in India.

You can buy the ABB 1SDA068535R1 online on VendorStocks, the B2B electrical marketplace from Skylights Energy, Bangalore. The VendorStocks team can help with product selection.

Yes, VendorStocks takes bulk and project-quantity orders for the ABB 1SDA068535R1. Contact VendorStocks at +91 99021 83031 or support@skylightsenergy.in with your required quantity for a quotation on the full quantity and delivery to your site or panel manufacturing unit.

Yes. Contact VendorStocks at +91 99021 83031 or support@skylightsenergy.in with your quantity for a formal quotation on the ABB 1SDA068535R1, or add it to your cart and choose “Continue to Buy” to order directly. For a project with several items, email your BOM (Bill of Materials) to support@skylightsenergy.in for a single consolidated quote.

Yes, you can request the ABB datasheet for the 1SDA068535R1 from VendorStocks at +91 99021 83031 or support@skylightsenergy.in.

Online payments on VendorStocks are processed securely through Razorpay. The payment options available for your order are shown at checkout.