EM90982OOFO Lauritz Knudsen MCCB dsine DY125U - 40 A, 2 Pole, 25 kA at 240 V AC / 10 kA at 250 V DC, Thermal-Magnetic Release

The Lauritz Knudsen EM90982OOFO is the MCCB dsine DY125U - 40 A, 2 Pole, 25 kA at 240 V AC / 10 kA at 250 V DC, Thermal-Magnetic Release. Moulded case circuit breaker, dsine DY125U, 2 Pole, thermal release range 40 A, breaking capacity Icu 25 kA at 240 V AC / 10 kA at 250 V DC. Overload setting adjustable 0.8 - 1.0 x In.

The Lauritz Knudsen EM90982OOFO is used as an incoming or outgoing breaker in main distribution boards (MDBs), sub-distribution boards (SDBs), motor control centers (MCCs), power control centers (PCCs) and feeder circuits, for loads up to 40A.

MCCBs of this type are commonly fitted with a shunt release for remote tripping, an undervoltage release, auxiliary and alarm contacts for status signalling, a motor operator for remote switching, rotary handles for door-mounted operation, extended or spreader terminals, and padlocking devices. Availability depends on the frame size, so check the Lauritz Knudsen accessory list for the EM90982OOFO before ordering.

A thermal magnetic release uses a bimetal for overload and an electromagnet for short-circuit protection. It is simple and cost-effective for standard feeders. An electronic or microprocessor release measures current electronically and offers adjustable overload, short-circuit and, on some versions, earth fault settings. It is preferred where finer coordination between breakers is needed. Lauritz Knudsen names its microprocessor releases MTX on dsine DN breakers and iTRP on dsine DZ breakers.

Calculate the prospective short-circuit current at the point of installation from the transformer kVA and percentage impedance (plus the upstream fault level), reduced by the cable impedance in between, then select an MCCB whose breaking capacity (Icu) at your system voltage (415V) is at least that value. Where supply must continue after a fault, check the service breaking capacity (Ics) too. Breaking capacity versions differ by brand and frame size, so always read the kA value for the exact model.

Yes, the Lauritz Knudsen EM90982OOFO (MCCB dsine DY125U - 40 A, 2 Pole, 25 kA at 240 V AC / 10 kA at 250 V DC, Thermal-Magnetic Release) is listed on VendorStocks. Add it to your cart and choose “Continue to Buy”, or contact VendorStocks at +91 99021 83031 or support@skylightsenergy.in for a quotation, bulk quantities and delivery to your site in India.

You can buy the Lauritz Knudsen EM90982OOFO online on VendorStocks, the B2B electrical marketplace from Skylights Energy, Bangalore. The VendorStocks team can help with product selection.

Yes, VendorStocks takes bulk and project-quantity orders for the Lauritz Knudsen EM90982OOFO. Contact VendorStocks at +91 99021 83031 or support@skylightsenergy.in with your required quantity for a quotation on the full quantity and delivery to your site or panel manufacturing unit.

Yes. Contact VendorStocks at +91 99021 83031 or support@skylightsenergy.in with your quantity for a formal quotation on the Lauritz Knudsen EM90982OOFO, or add it to your cart and choose “Continue to Buy” to order directly. For a project with several items, email your BOM (Bill of Materials) to support@skylightsenergy.in for a single consolidated quote.

Yes, you can request the Lauritz Knudsen datasheet for the EM90982OOFO from VendorStocks at +91 99021 83031 or support@skylightsenergy.in.

Online payments on VendorStocks are processed securely through Razorpay. The payment options available for your order are shown at checkout.

The Lauritz Knudsen EM90982OOFO specifications are: Rated current: 40 A; Poles: 2P; Release: thermal-magnetic. For anything not listed here, request the Lauritz Knudsen datasheet from VendorStocks at +91 99021 83031 or support@skylightsenergy.in.